LIKAGE Brass Hose Quick Connect Review
As an Amazon Associate we earn from qualifying purchases.
The LIKAGE Brass Hose Quick Connect is a two-pack of solid brass 3/4 inch GHT fittings meant to join a garden hose to a faucet, spigot adapter, or attachment without tools. This LIKAGE Brass Hose Quick Connect review covers what the Amazon listing says about materials, thread type, package contents, and use, which of its claims independent sources can and cannot confirm, and what to check before buying. Product facts come from the listing as read on 2026-10-27. The sources at the end describe the wider hose-bibb backflow context.
Quick answer
- The listing describes the fittings as solid brass with a standard 3/4 inch GHT thread for standard garden hoses.
- The listing says the package includes two male connectors, two female connectors, and two extra rubber washers, which is six pieces in total, even though its spec table lists two pieces.
- The listing states the fittings are NOT auto shut-off, so the connector itself does not stop the flow.
- Neither source fetched for this review covers quick connectors, so no backflow or pressure claim is made for this product.
What the listing says
The specification table on the listing gives the following values. These are the only product facts used in this review.
| Field | Listing value |
|---|---|
| Brand | LIKAGE |
| Material | Brass |
| Exterior finish | Brass |
| Color | Brass |
| Size | 2 Packs |
| Connector type | Quick-Connect |
| Thread type | GHT |
| Thread size | 3/4 Inch |
| Number of pieces | 2 |
| Number of packs | 2 |
| Item weight | 6.7 ounces |
The About this item bullets make five points. The first says the fittings are solid brass, heavy duty, rust proof, and built to last season after season. The second says they use standard 3/4 inch GHT thread and work with a standard garden hose, and that they are not auto shut-off. The third describes the release: pull back the female connector, insert the male end, and no tools are required. The fourth says a precision design thread will tightly fit the hose to prevent leakage. The fifth lists the package: two male connectors, two female connectors, and two extra rubber washers.
The thread type field and the bullet text agree. Both say GHT, which is the spec a buyer needs to match a standard North American hose or spigot. That agreement is a useful contrast with some other listings in this category, where the spec table and the bullets name different thread standards.
The piece count is the one inconsistency in the listing. The spec table says two pieces, while the bullets describe six: two male connectors, two female connectors, and two rubber washers. The bullets are more specific, so the most likely reading is six pieces across two packs. The listing does not settle the question, so a buyer who needs exact counts should check the package on arrival.
Construction and materials
The listing describes the fittings as solid brass, heavy duty, and rust proof. Brass is a common choice for hose fittings, and the listing’s material and finish fields both say brass. This review cannot confirm the rust-proof or season-after-season claims from a manufacturer datasheet, because the listing does not link to one, and neither independent source addresses this product’s alloy or corrosion performance.
The listing includes two extra rubber washers. Washers are the part that seals the female end against the male end, so they are the component most likely to need replacement over time. The listing does not name the washer material, a hardness rating, or a replacement schedule. A buyer who leaves the connection in place year-round should keep spare washers on hand.
The listed item weight is 6.7 ounces. That is light enough that the fittings will not add meaningful load to a faucet, but the figure does not tell a buyer how thick the walls are or how the parts are machined. Those details are not in the listing.
Fit and thread compatibility
Thread compatibility is the first thing to confirm. The listing says the fittings use 3/4 inch GHT, which is the hose thread most garden hoses and outdoor spigots use. A buyer should still check the thread on each hose end and faucet before ordering, because a pipe thread such as NPT is not interchangeable with a hose thread, and a mismatched fitting may not seal.
The listing also states the fittings are NOT auto shut-off. In practice, that means the fitting does not close off water when the male and female halves separate. A buyer who wants water to stop at the faucet when a hose is removed should look for a model with a shut-off valve instead. This is a clear limit stated in the listing, and it matters most for a hose that is disconnected under pressure.
The listing does not give a pressure rating or a flow rate. It also does not say whether the fittings have been tested with a pressure washer, even though a pressure washer produces much higher pressure than a standard spigot. A buyer who plans to connect the fittings to a washer should check the washer manufacturer’s inlet specifications before buying.
Installation and daily use
The listing describes a no-tools release. According to the bullet text, a user pulls back the female connector, inserts the male end, and the connection is made. Disconnecting uses the same motion. Installation involves threading the male and female halves onto the hose and the faucet first, which is a one-time task. After that, changing sprayers or hoses is the repeated action.
The listing says the threads fit tightly to prevent leakage. That is a claim about fit, and it depends on the thread matching and the washers being seated. A fitting that is cross-threaded or has a worn washer may leak or may need a wrench. A buyer should not force a connection that does not seat easily.
Handling habits help any quick connector last. Disconnect the hose from pressurized water when changing attachments, keep the washers clean and inspect them for flattening or cracks, and store fittings out of direct sun when they are not in use. These are general points, and the listing does not make storage claims.
Where a quick connector fits in a garden water setup
A hose connector sits between a faucet and a hose, or between a hose and an attachment. That position matters for water safety. The LSU AgCenter explains that backflow can carry contaminated water from a garden hose back into a home or a municipal supply. Its guidance focuses on hose bibb vacuum breakers, which screw onto the faucet. The extension page says a hose bibb vacuum breaker should be at least 6 inches above the ground, and it notes that these devices are required by many plumbing codes.
The EPA cross-connection control manual makes a related point. It describes hose bibb vacuum breakers as protection against backsiphonage, and it says they should not be used as backpressure devices. Backsiphonage and backpressure are different conditions, and a device rated for one may not protect against the other.
These points do not transfer directly to this connector. Neither source discusses quick connectors, and neither says whether a brass quick connector can or cannot serve as a backflow device. A buyer who needs backflow protection should buy a device rated for that purpose and check local code, rather than relying on a connector. This review makes no backflow claim for the LIKAGE product.
Buying checklist
- Confirm that your hose end and faucet use 3/4 inch GHT before ordering.
- Decide whether you need auto shut-off. This listing says the fittings are not auto shut-off.
- If you plan to use a pressure washer, check the washer’s inlet specifications against the listing, which gives no pressure rating.
- Keep spare washers on hand, since the listing does not give a replacement schedule.
- Count the pieces on arrival, because the spec table and the bullets give different piece counts.
What we could not verify
This review could not verify the following points from independent sources or from the listing itself. The piece count conflict is the first. The rust-proof and season-after-season claims, the leak-free claim, the washer material, and any pressure rating are all unverified. The listing gives no test data and no certification, so long-term durability cannot be judged here.
What the sources do not say
The LSU AgCenter page and the EPA manual both address hose bibb vacuum breakers. Neither addresses quick-connect fittings, the brass alloy used in this product, GHT thread tolerances, or the pressure these fittings can hold. Any claim about those points would be unsupported by the sources used here.
Related guides
Readers who set up a hose network can read the drip irrigation setup guide for layout ideas, the soaker hose guide for low-pressure watering, and the rain barrel and hose guide for connecting stored water to a garden hose.
Frequently asked questions
Does this set stop water when the hose is removed? The listing says the fittings are NOT auto shut-off, so water is not stopped by the connector itself.
What thread does it use? The listing says 3/4 inch GHT in both the spec table and the bullet text.
How we chose the sources and listing data
This page was selected from a batch of garden hose connector listings. Its product facts come only from the listing fields captured on 2026-10-27, and its context claims come only from the two non-retail sources listed at the end.
Sources
- LSU AgCenter, “Using Vacuum Breakers to Prevent Backflow With Garden Hoses”, https://www.lsuagcenter.com/topics/lawn_garden/ornamentals/equipment/irrigation/using-vacuum-breakers-to-prevent-backflow-with-garden-hoses (HTTP 200, opened 2026-10-27). Quote: “The HVB should be at least 6 inches above the ground so there is no risk of it being in a puddle of water.” Supports: hose bibb vacuum breaker mounting height and the claim that these devices are required by many plumbing codes.
- U.S. Environmental Protection Agency, Cross-Connection Control Manual, EPA 816-R-03-002 (February 2003), https://www.epa.gov/sites/default/files/2015-09/documents/epa816r03002_0.pdf (HTTP 200, opened 2026-10-27). Quote: “They should not be used as backpressure devices.” Supports: hose bibb vacuum breakers protect against backsiphonage and do not protect against backpressure.
