Fiskars vs gonicc: Hand Tools comparison

As an Amazon Associate we earn from qualifying purchases. Details

This page compares a Fiskars 5/8-inch bypass pruner with a gonicc 8-inch titanium-coated pruner. Two Fiskars extras, a three-piece hand tool set and a two-piece folding saw and pruner set, widen the view of what the brand offers in this category. The research products were checked on 2026-10-12 and the extra listings on 2026-10-20. The listing data for the gonicc names a blade and handle material in its specification table that its bullets describe differently, and both versions are shown below.

Quick answer

The gonicc lists a cutting width of 0.75 inches against 0.63 inches for the Fiskars pruner, which is about 19 percent wider on paper. It is also longer, at 11.02 inches against the Fiskars 9.07 inches. The gonicc states a titanium-coated steel blade and says it can cut branches up to 3/4 inch. The Fiskars listing states a lifetime warranty and gives the most care notes of the two pruners. For a set of hand tools rather than a single pruner, the Fiskars extras show a trowel, transplanter, and cultivator, or a saw and pruner pair.

Listing figures side by side

Listing	Cutting width stated	Length stated	Weight stated	Blade and handle stated	Warranty or extra stated
Fiskars 5/8-inch bypass pruner (B00002N66H)	0.63 in	9.07 in (product dimensions)	Not stated	Alloy steel blade; alloy steel handle	Lifetime warranty
gonicc 8-inch titanium pruner (B01JZFC9QS)	0.75 in	11.02 in	150 g (about 5.3 oz)	Alloy steel in specification; SK-5 steel with titanium coating and aluminum handles in bullets	Anti-rust oil film noted as normal
Fiskars three-piece garden hand tool set (B01MUXL5V8)	Not applicable	13.5 x 2.63 x 4.13 in	Not stated	Cast-aluminum heads and tines; SoftGrip handles	Lifetime warranty
Fiskars two-piece folding saw and pruner set (B007UW8SB4)	0.5 in (pruner)	5 in blade length	1.06 lb	Triple-ground folding saw blade; SoftGrip handles	Not stated

Fiskars 5/8-inch bypass pruning shears

The Fiskars listing describes a bypass pruner for live growth, with a cut capacity of 5/8 inch. The product dimensions are 9.07 by 2.47 inches, and the blade is described as precision-ground steel. The blade edge is serrated and the point round. The grip is ambidextrous and the handle is alloy steel. The listing describes a coating that reduces friction and sap buildup, a sap groove, and an easy-open safety lock.

The included item is the pruner itself, and the listing states a lifetime warranty. The care tips in the bullets say to wipe the pruner after each use and lightly oil the blade. No weight is stated in the data used on this page.

gonicc 8-inch titanium pruning shears

The gonicc listing is an 8-inch pruner in golden titanium, weighing 150 grams. Its product dimensions are 11.02 by 3.82 inches and its cutting width is 0.75 inches. The specification table gives a bypass blade type, a serrated edge, and an alloy steel blade and handle. The bullets describe a drop-forged build, an SK-5 steel blade with titanium coating, and aluminum handles wrapped in PVC for grip.

The listing says the pruner is built for branches up to 3/4 inch. It describes a sap groove that carries sap away from the blade. The bullets state that a thin layer of anti-rust oil is applied, and that a slight residue on arrival is normal. No warranty length is given in the listing data used here.

Fiskars three-piece garden hand tool set

The set listing includes a trowel, a transplanter, and a cultivator, sold as the Ergo Garden Tool Set. The specification table gives an item size of 13.5 by 2.63 by 4.13 inches and a manufacturer warranty of lifetime. The heads and tines are cast aluminum and the handles are SoftGrip. The listing says the heads and tines are meant for digging in tough soil.

This set is not a pruner. It is included because the keyword refers to hand tools, and it shows what a Fiskars garden set contains beside a pruner.

Fiskars two-piece folding saw and pruner set

This set pairs a bypass pruner with a folding hand saw. The listing gives a pruner cutting width of 0.5 inches, a saw blade length of 5 inches, and a total weight of 1.06 pounds. The bullets say the pruner is for live green growth and the saw for deadwood. The saw blade is described as triple-ground and as cutting on both push and pull strokes. Both handles are SoftGrip. The listing does not state a warranty length.

How these listings were chosen

The research set held the Fiskars 5/8-inch pruner and the gonicc 8-inch pruner. Two Fiskars extras, the three-piece set and the two-piece saw and pruner set, were added from checks dated 2026-10-20. Those two are included to show Fiskars hand tools beyond a single pruner. The gonicc listing gives two accounts of its blade and handle, and both are reported in the text rather than choosing one.

Worked example: cutting width and length against the Fiskars pruner

The gonicc’s 0.75-inch cutting width divided by the Fiskars 0.63 inches gives about 1.19, so the gonicc lists a cut about 19 percent wider. Its overall product length is 11.02 inches against the Fiskars 9.07 inches, which is 1.95 inches longer. For a gardener cutting branches close to the top of the stated range, the gonicc figure is the one to check first.

Weight is less direct. The gonicc weighs 150 grams, about 5.3 ounces. The Fiskars 5/8-inch listing gives no weight, so no ratio can be drawn. The Fiskars SoftGrip listing, a different model, states 7 ounces, which is about 1.3 times the gonicc weight. That comparison is only between separate listings and should be read as a rough reference, not a pair test.

What the listings do not say

The Fiskars 5/8-inch listing gives no weight, and its two size fields do not agree. The gonicc specification table names an alloy steel blade and an alloy steel handle, while its bullets name an SK-5 steel blade with titanium coating and aluminum handles. The gonicc listing mentions an anti-rust oil film, which the buyer should expect on arrival. Neither the Fiskars saw and pruner set nor the gonicc gives a warranty length. The three-piece set gives no weight, so it cannot be compared with the pruners on weight.

Frequently asked questions

Which pruner has the wider cutting width?

The gonicc lists 0.75 inches against 0.63 inches for the Fiskars 5/8-inch pruner, which is about 19 percent wider on the stated numbers.

Is the gonicc blade titanium?

The gonicc bullets describe an SK-5 steel blade with a titanium coating. Its specification table lists the blade material as alloy steel. The product page should be read for the final wording.

Does the Fiskars pruner have a warranty?

Yes. The Fiskars 5/8-inch listing states a lifetime warranty.

Does the gonicc need oil before use?

The gonicc listing says a thin layer of anti-rust oil is applied, and that a slight residue on arrival is normal. It does not say the blade must be oiled before first use.

What is included in the Fiskars three-piece set?

The set includes a trowel, a transplanter, and a cultivator, with cast-aluminum heads and tines and SoftGrip handles.

Conclusion

The gonicc offers the wider cut and the longer blade of the two pruners, while the Fiskars has the lifetime warranty and the clearer care notes. The Fiskars extras show a garden set and a saw pairing for readers who need more than one tool. Confirm the blade and handle materials on the gonicc product page, and check whether a warranty applies to the pruners before buying.

Amazon links

Fiskars 5/8-inch bypass pruning shears (ASIN B00002N66H): View on Amazon

gonicc 8-inch titanium pruning shears (ASIN B01JZFC9QS): View on Amazon

Fiskars three-piece garden hand tool set (ASIN B01MUXL5V8): View on Amazon

Fiskars two-piece folding saw and pruner set (ASIN B007UW8SB4): View on Amazon

Fiskars vs gonicc: Hand Tools compared