Wrought Iron Hose Holder with Ground Stake
As an Amazon Associate we earn from qualifying purchases. Details
A freestanding hose holder with ground stakes keeps a garden hose off the lawn, and the stakes hold the frame in the soil. Check three things on each listing: the stake count, the hose length it states, and the load figure. None of the six holders below uses the words “wrought iron”, so none of the listings confirms wrought iron. Two list alloy steel, two list metal, one lists metal with plastic end caps, and S SUCHEK lists iron. If wrought iron is a firm requirement, ask each seller in writing before you buy. For most yards, a four-stake holder rated for 150 ft of hose is the simplest fit.
Quick answer: top picks
- Best overall: YFFSRJDJ Garden Hose Holder (ASIN B0HCTR42DV). Alloy steel, four ground stakes, up to 150 ft of hose and a 150 lb load figure.
- Best for an antique finish: YQSLYSF Garden Hose Holder (ASIN B0H3P44VVT). Antique bronze finish, four stakes and 150 ft capacity.
- Best for stake length: OLV Garden Hose Holder (ASIN B0G6C8S7FQ). The only listing here that states its stake length, at 7 inches.
- Best for cast iron joints and a 160 ft hose: LAND·VOI Freestanding Garden Water Hose Holder (ASIN B0D44WS35C). Confirm the load figure first, because the listing gives two.
- Best for a named iron material: S SUCHEK Metal Garden Hose Holder Stake (ASIN B0B4T2YQXP). Iron, galvanized and electrophoresis-coated, with a 16 kg load figure, but no hose length stated.
- Best for a short 50 ft hose: Water Hose Holder with Stake, listed under Stalwart (ASIN B01H6S9D74). Light, one stake, and it comes apart for storage.
What the listings say about the material
The keyword asks for wrought iron, and none of the six listings uses that term. Each one describes its metal in a different way. S SUCHEK lists iron with a powder-coated finish and says the pipe is galvanized and then electrophoresis-coated. LAND·VOI describes cast iron threaded joints on industrial steel pipes. YFFSRJDJ and YQSLYSF list alloy steel, OLV lists metal with an electrophoretic coating, and the Stalwart-listed holder lists metal with plastic end caps. No listing gives a steel grade or a test method for the material. Galvanizing puts a zinc layer on the steel that keeps water, moisture and other elements in the air from corroding the metal underneath, according to Metal Supermarkets.
How the six holders compare on the listing
The table gives only the figures each listing states. A dash means the listing does not state the figure.
| Holder | Material stated | Stakes or spikes | Hose length stated | Load stated | Weight or height stated |
|---|---|---|---|---|---|
| YFFSRJDJ (B0HCTR42DV) | Alloy steel | 4 ground stakes | Up to 150 ft | 150 lb | 6.4 lb; 68.9 in tall |
| YQSLYSF (B0H3P44VVT) | Alloy steel | 4 ground stakes | Up to 150 ft | 150 lb | 43.3 in tall |
| OLV (B0G6C8S7FQ) | Metal | 4 spikes, 7 in | Up to 150 ft | – | 4.5 lb; 41.3 in tall |
| LAND·VOI (B0D44WS35C) | Metal, cast iron joints | 3 anchor points | Up to 160 ft | 150 lb (specification row) and 44 lb (bullet) | 47.6 in tall |
| S SUCHEK (B0B4T2YQXP) | Iron | 3 spikes | – | 16 kg | – |
| Stalwart-listed (B01H6S9D74) | Metal, plastic end caps | 1 stake | 50 ft | – | 1.45 lb; 31 in tall |
The six freestanding hose holders, one by one
1. YFFSRJDJ Garden Hose Holder, Water Hose Stand with 4 Stakes: best overall
Specs (from the listing, checked 2026-10-11): material alloy steel, black. Style freestanding. Dimensions 15.87 x 7.68 x 68.9 inches. Weight 6.4 pounds. Stakes: four lengthened ground stakes on a welded triangular base. Hose capacity up to 150 ft. Load 150 lb (bullet). Hooks: two back tool hooks and two top shepherd hooks (bullet). Assembly: a step-by-step manual and all hardware are included. Model number NEW-HH-MYG. The listing does not state a coating or a galvanizing process.
Pros: four stakes; 150 ft capacity with a 150 lb load figure; tool hooks for shears and nozzles; weight and height both stated. Cons: the bullet says two shepherd hooks, but the components row lists one “Shepherd Hook”; the listing does not name iron; no coating is stated.
Best for: a 100 ft or 150 ft hose kept off the lawn, with stakes and a tool hook. Skip if: you need the listing to name iron or a galvanized finish.
View on Amazon (affiliate link)
2. YQSLYSF Garden Hose Holder with 4 Stakes, Antique Bronze: best for an antique finish
Specs (from the listing, checked 2026-10-11): material alloy steel. Color antique bronze. Dimensions 15.8 x 7.7 x 43.3 inches. Stakes: four lengthened ground stakes on a welded base with a triangular structure (bullet). Hose capacity up to 150 ft (bullet). Load 150 lb capacity (bullet and specification row). Hooks: two built-in back tool hooks (bullet and components row). Assembly: a manual and all hardware are included. The listing does not state a weight, a coating or a galvanizing process.
Pros: four stakes; 150 ft capacity; the only antique-bronze finish in this group; the two tool hooks appear in both the bullet and the components row. Cons: the listing says alloy steel rather than iron; no weight is stated; the coating is not described.
Best for: a patio or front bed where a bronze tone suits the space and a 150 ft hose is needed. Skip if: you need the listing to name iron, or you need the weight before buying.
View on Amazon (affiliate link)
3. OLV Garden Hose Holder, Heavy Duty Metal Freestanding Stake with 4 Spikes: best for stake length
Specs (from the listing, checked 2026-10-11): material metal, black single rod. Style freestanding. Dimensions 13.8 x 4.7 x 41.3 inches. Weight 4.5 pounds. Stakes: four 7-inch extended ground spikes (bullet). The bullets give hose capacity as up to 150 ft. Frame: 0.8 mm thick and 25 mm wide, with an electrophoretic coating, joined with stainless screws (bullet). Assembly: a clear installation manual is included. The listing does not state a load capacity.
Pros: the only stated stake length in this group (7 inches); frame thickness, width, coating and screw material are all stated; at 4.5 pounds it is lighter than the YFFSRJDJ holder. Cons: no load figure; at 41.3 inches it is shorter than the YFFSRJDJ holder. The “ruler-straight under full weight” line is the seller’s own claim.
Best for: buyers who want the longest stated stake and a coated metal frame. Skip if: you need a stated load capacity before you buy.
View on Amazon (affiliate link)
4. LAND·VOI Freestanding Garden Water Hose Storage Holder, 160 ft Hose: best for cast iron joints
Specs (from the listing, checked 2026-10-11): material metal. Finish galvanized. Dimensions 14.4 in deep, 14.4 in wide, 47.6 in tall. Stakes: three anchor points (bullet). Hose capacity up to 160 ft (title and bullet). Joints: cast iron threaded joints (bullet). Load: the specification row gives a 150 lb shelf weight capacity, and a bullet gives 44 lb; the listing is inconsistent. Model: the specification row says GHH02B, and the title says GHH01B. Installation: stake the three anchor points into the ground, with no drilling or wall mounting. Detachable (special feature).
Pros: cast iron joints are the closest material wording in this group to the keyword; 160 ft capacity; galvanized finish; detachable. Cons: two load figures and two model numbers; three anchor points rather than four.
Best for: an iron-jointed holder for a long hose, once you have confirmed the load figure with the seller. Skip if: you need one load figure you can rely on before buying.
View on Amazon (affiliate link)
5. S SUCHEK Metal Garden Hose Holder Stake, Freestanding Iron Hose Stand: best for a named iron material
Specs (from the listing, checked 2026-10-11): material iron. Finish powder coated. Process: the steel pipe is galvanized and then electrophoresis-coated, per the bullet. Shape: three spikes, with triangular iron plates at the base (bullet). Load capacity 16 kg (specification row; the bullet describes a test with iron blocks up to 16 kg). Levels: one. Detachable (bullet). Color black. The listing does not state a hose length or overall dimensions.
Pros: iron is named as the material; galvanizing and electrophoresis are both stated; a load figure is given. Cons: no hose length, so it is hard to match to your hose; three spikes rather than four; the rust resistance is the seller’s own statement.
Best for: buyers who want the listing to name iron, and who already know their hose length. Skip if: you need the hose length stated before buying, or you want four stakes.
View on Amazon (affiliate link)
6. Water Hose Holder with Stake, listed under Stalwart: best for a short 50 ft hose
Specs (from the listing, checked 2026-10-11): materials metal with plastic end caps. Color green. Product dimensions 1 x 8.5 x 31 inches. Weight 1.45 pounds. Hose capacity: a 50-foot hose with a 5/8-inch diameter (bullet). Stake: one stake at the bottom of the holder, pushed into firm soil (bullet). A top hook keeps the hose end within reach (bullet). It comes apart for winter storage (bullet). Assembly: some assembly required. No load figure is given. The title names Stalwart, the brand field is blank, and the manufacturer row says Trademark GLB.
Pros: the lightest stated weight in this group; it comes apart for storage; the hose capacity is stated. Cons: one stake rather than several; 50 ft capacity only; the brand label differs between the title and the manufacturer row, and no load figure is given.
Best for: a 50 ft hose in a small yard that you move or store each winter. Skip if: you have a 100 ft or 150 ft hose, or you want more than one stake.
View on Amazon (affiliate link)
Stakes and anchoring
YFFSRJDJ, YQSLYSF and OLV state four stakes or spikes. LAND·VOI and S SUCHEK state three. The Stalwart-listed holder states one stake. Only OLV gives a stake length, so a comparison of grip in the soil rests on that one figure. More stakes spread the holder’s weight over more points, but none of the listings says how much more stable a holder is because of its stake count. The LAND·VOI listing says to stake the holder into firm grass, and the Stalwart-listed holder says to drive its stake into firm soil. If your ground is soft or stony, the listings do not say how the holder will perform, so test it with an empty hose first.
Hose length: matching the holder to your hose
YFFSRJDJ, YQSLYSF and OLV state up to 150 ft. LAND·VOI states up to 160 ft. The Stalwart-listed holder states 50 ft, and the S SUCHEK listing does not state a hose length.
Worked example for a 100 ft hose. Any holder with a stated 150 ft or 160 ft capacity has room for a 100 ft hose. The 50 ft Stalwart holder does not. The S SUCHEK listing gives no capacity, so it cannot be checked against a 100 ft hose.
Worked example for a 50 ft hose. The Stalwart holder matches its stated 50 ft capacity. The 150 ft holders will work, but they leave room you do not need.
How we choose
The person typing “wrought iron hose holder with ground stake” wants a holder that stands on its own, anchors in the ground, and is made of iron or steel. The criteria below follow from that.
- Material: the metal the listing names, quoted as written. Iron, cast iron and alloy steel are quoted as they appear. No listing says wrought iron.
- Anchoring: the number of stakes or spikes, and the stake length where the listing gives one.
- Capacity and load: the stated hose length and load figure. Where a listing gives two figures, both are quoted.
- Finish: galvanizing, powder coating and electrophoresis are reported only where the listing names them.
- Handling: stated weight and height, whether the holder is detachable, and whether it comes apart for storage.
Wall-mounted holders are not included, because they do not stand on the ground. Prices, star ratings and review counts are not used. Rust resistance and long-life statements are labelled as the seller’s claims.
Frequently asked questions
Is any of these holders listed as wrought iron?
No. None of the six listings uses the words wrought iron. S SUCHEK names iron as the material, LAND·VOI names cast iron threaded joints, and the others list alloy steel, metal or metal with plastic end caps. If the material label matters to you, get the seller’s answer in writing before you buy.
How many stakes does a holder need?
YFFSRJDJ, YQSLYSF and OLV show four stakes or spikes. LAND·VOI and S SUCHEK show three. The Stalwart-listed holder shows one. More stakes spread the weight over more points, but the listings do not say how much more stable a holder is because of its stake count.
How long a hose fits on these holders?
YFFSRJDJ, YQSLYSF and OLV state up to 150 ft, and LAND·VOI states up to 160 ft. The Stalwart-listed holder states a 50 ft hose with a 5/8-inch diameter. The S SUCHEK listing does not state a hose length.
Can I move the holder to a different spot?
Yes, for most of them. The S SUCHEK and LAND·VOI listings describe the holder as detachable. The Stalwart-listed holder can be pulled from the ground and reinstalled. The YFFSRJDJ listing describes it as lightweight for easy relocation.
Do any of these need drilling or a wall mount?
No. The LAND·VOI listing says no drilling or wall mounting is needed, and the Stalwart-listed holder says nothing needs to be mounted to the house, siding or porch. All six are described as freestanding and staked into the ground.
Related guides
For a spray attachment to use on the same hose, see our high pressure garden hose gun guide. If you would rather store the hose on a reel, see our heavy duty garden hose reel guide. For a hose attachment used when watering plants, see hose attachments for watering plants. For another freestanding holder, see our free standing wrought iron hose holder guide.
Conclusion: a decision rule
For a 100 ft or 150 ft hose on a lawn, choose YFFSRJDJ for four stakes, a stated 150 lb load and tool hooks. For an antique finish, choose YQSLYSF. For the longest stated stake, choose OLV. For an iron-jointed holder that takes a 160 ft hose, choose LAND·VOI once you have confirmed its load figure. If the listing must name iron, choose S SUCHEK and confirm the hose length yourself. For a 50 ft hose you move around, choose the Stalwart-listed holder. None of these listings says wrought iron, so do not buy on that label without written confirmation from the seller.
