Hot and Cold Garden Hose Faucet
As an Amazon Associate we earn from qualifying purchases. Details
Someone searching for a hot and cold garden hose faucet usually wants one wall fixture that gives separate hot and cold supplies and ends in a threaded outlet for a hose, for washing a car, a dog or a patio. This roundup covers six listings that fit that description in different ways: three frost-free hose bibbs with a 3/4 inch hose thread, one hot and cold mixing hydrant, and two hot and cold wall faucets from Woodford that connect to PEX tubing. Specs come from the Amazon listings, checked on 2026-10-18, and the listings disagree with themselves in several places, so the conflicts are shown.
Quick answer
- Best documented for a hose: the WHK 12 inch hot and cold faucet. Its listing states the 3/4 inch GHT outlet, 125 psi working pressure and a 32 to 140 F working water temperature. Its Material Type field says copper, while its title and bullets say brass.
- Best 4 inch choices: the WHK 4 inch and the Lifarsculp 4 inch, both listed as 1/2 inch MIP x 3/4 inch GHT. The WHK lists a vacuum breaker; the Lifarsculp lists 125 psi and a 32 to 140 F working range.
- For mild climates only: the Woodford 122PX, which its listing describes for areas where freezing is not expected.
- Check before you buy: the Prier and both Woodford listings do not state a hose-thread outlet.
What to compare
- Outlet thread. A garden hose needs a 3/4 inch GHT (garden hose thread) outlet. Three listings state it. Three do not.
- Freeze design. A supplier guide from BW Valve says a frost-proof sillcock has a long stem so the shutoff seat sits in the heated interior, and the water left in the spout drains out by gravity. It says to disconnect the hose before the first frost, to mount the spigot with a slight downward slope toward the outside (about 5 to 10 degrees), and never angled upward.
- Backflow protection. The same supplier guide says an anti-siphon model includes a backflow prevention device so that a hose left in a bucket cannot pull dirty water back into the supply, and says many regions require this on new outdoor faucets. Check your local rules.
- Length. BW Valve gives lengths of 4 to 24 inches and says to measure from the outside wall surface to the interior water pipe and choose a slightly longer unit.
- Installation. You need both hot and cold supply lines at the wall. That is plumbing work: follow each product’s manual and your local plumbing code. We do not give installation steps here beyond what the sources state.
Quick comparison
| Product | Listed length | Hose outlet stated? | Freeze design stated? | Anti-siphon / vacuum breaker |
|---|---|---|---|---|
| WHK 4 inch | 4 inch | Yes, 3/4 inch male GHT | Yes, freeze proof | Yes, vacuum breaker |
| WHK 12 inch | 12 inch | Yes, 3/4 inch GHT | Yes, a no freeze spigot | Not stated in the bullets |
| Lifarsculp 4 inch | 4 inch | Yes, 3/4 inch GHT | Yes, freeze-proof structure | Not stated in the bullets |
| Prier C-108D06 | 6 inch | Not stated | Not stated | Yes, anti-siphon vacuum breaker |
| Woodford 122PX | Not stated | Not stated | No: for areas where freezing is not expected | Atmospheric vent in the description |
| Woodford V22PX-10-MH | 10 inch rough-in | Not stated | Described for year-round use; style field says freezeless | Atmospheric vent and patented check |
Worked example: picking a length
This is a planning example with an assumed wall. Say you measure 5.5 inches from the outside surface to the interior water pipe. The BW Valve guide says to choose a slightly longer unit than the wall measurement. A 4 inch unit is too short for that wall. A 12 inch unit is long enough but leaves 6.5 inches more than the wall measurement, and the guide does not say how much extra is acceptable. The 6 inch Prier would be closest to the measurement, but its listing does not state freeze protection or a hose outlet, so it fits a different job. Measure first, then check the listed length against your wall before ordering.
The six listings
1. WHK 12 Inch Hot Cold Outdoor Water Faucet, Frost Free (best documented for a hose)
Specs from the listing (checked 2026-10-18):
- Length: 12 inch; bottom thread 1/2 inch MIP; hose outlet 3/4 inch male GHT
- Working pressure and temperature: 125 psi; 32 to 140 F working; maximum water temperature 180 F
- Handles: 2, knob style; valve type listed as a shut off ball valve
- Weight and size: 2.35 pounds; 12 in D x 6.8 in W x 2 in H
- Finish: chrome; warranty type limited
Pros
- States hose thread, pressure and both temperature figures
- Package is one frost free faucet; the listing says it installs horizontally on an outdoor wall
Cons
- Title and bullets say brass, while the Material Type field says copper
- The bullets do not mention a vacuum breaker or anti-siphon feature
- At 12 inches it suits a deep wall only
Best for: Buyers who want the most stated specs
Skip if: Your wall is thin or your local rules require a stated backflow device
View on Amazon (affiliate link)
2. WHK 4 Inch Frost Free Hot Cold Outdoor Faucet (with vacuum breaker)
Specs from the listing (checked 2026-10-18):
- Length: 4 inch; bottom thread 1/2 inch MIP; hose outlet 3/4 inch male GHT
- Material and finish: brass, chrome-coated; lever handles
- Handles: 2; hole count 3
- Weight and size: 3.08 pounds; 9.5 in D x 6.8 in W x 2.8 in H
- Anti-siphon: listing says a vacuum breaker (pressure relief valve) is included
Pros
- Lists a vacuum breaker, the backflow feature the supplier guide describes
- Bullets state lead-free brass; no standard is named
Cons
- The Model Number field (WHK-Frhc-06-4) and the Manufacturer Part Number field (WHK-Frhc-09-8) do not match
- The Mounting Type field reads embedded, while the Installation Method reads wall mount
Best for: Shallow walls where a short unit with a vacuum breaker is wanted
Skip if: Your wall is deeper than a 4 inch unit can reach
View on Amazon (affiliate link)
3. Lifarsculp 4 Inch Frost Free Outdoor Faucet, Hot and Cold
Specs from the listing (checked 2026-10-18):
- Connection: 1/2 inch MIP x 3/4 inch GHT
- Working range: 32 to 140 F; maximum water pressure 125 psi
- Material and finish: brass, chrome; cross handles
- Handles: 2 (spec table)
- Weight: 2.09 pounds
Pros
- States hose thread, pressure and temperature range
- Bullets describe lead-free brass with an anti-corrosion coating
Cons
- The bullets say hot and cold water come through a single 4 inch faucet, while the spec table lists two handles
- No vacuum breaker or anti-siphon feature appears in the bullets we read
Best for: A second 4 inch option with stated pressure and temperature
Skip if: You want a listing with a clear backflow statement
View on Amazon (affiliate link)
4. Prier C-108D06 6-Inch Hot and Cold Mixing Hydrant
Specs from the listing (checked 2026-10-18):
- Connections: 1/2 inch MIP x 1/2 inch SWT (sweat)
- Spout: 6 inch height and 6 inch reach
- Features: anti-siphon vacuum breaker, internal thermal migration prevention
- Material and finish: brass, satin nickel; knob handle; one handle
- Weight: 2 pounds
Pros
- Bullets say it can be installed horizontally or vertically
- Anti-siphon vacuum breaker is stated
Cons
- The spec table gives recommended uses as bathroom and kitchen and room type as kitchen, which does not match a hose hydrant
- The bullets give package dimensions of 26.67 x 42.16 x 7.37 inches, which do not fit a 2 pound faucet
- No hose-thread outlet or freeze protection is stated
Best for: Buyers who have confirmed the outlet thread with the manufacturer
Skip if: You need to plug in a garden hose today without adapters
View on Amazon (affiliate link)
5. Woodford V22PX-10-MH Vertical Hot and Cold Wall Faucet
Specs from the listing (checked 2026-10-18):
- Inlet: 1/2 inch PEX; 10 inch rough-in or 11 1/8 inch mounting depth
- Handle: powder coated cast aluminum; lever; compression valve
- Protection: atmospheric vent and patented check for anti-siphon protection
- Weight: 4.29 pounds
- Use: washing vehicles, sanitary cleanup and pet care; described as intended for year-round residential irrigation purposes
Pros
- Manufacturer text states the backflow protection and the mounting depth
- Style field calls it freezeless
Cons
- The spec table lists 1 handle and a hole count of 18, which look odd for a hot and cold wall faucet
- No hose-thread outlet is stated
- Dimension field lists 3 x 3.15 x 2.56 inches, which does not match a 10 inch rough-in
Best for: PEX plumbing where a freezeless hot and cold fixture is needed and the outlet thread is confirmed first
Skip if: You need a stated 3/4 inch hose thread
View on Amazon (affiliate link)
6. Woodford 122PX Wall Faucet (mild climates only)
Specs from the listing (checked 2026-10-18):
- Inlets: PX inlets for PEX tubing, types B and C, with crimp rings or cinch clamps
- Controls: separate hot and cold inlets and operating handles for manual temperature control
- Fit: can be plumbed within a 2 x 4 framed wall
- Vent: atmospheric vent
Pros
- Suggested uses include outside hot and warm water cleaning, washing the car and pet care
- Separate hot and cold handles
Cons
- The bullets say it is designed for mild climate areas where freezing is not expected
- No hose-thread outlet is stated
- Spec fields are sparse: no length, weight or material
Best for: A garage or washing station that does not freeze
Skip if: Your wall faces a freezing winter
View on Amazon (affiliate link)
Which one to choose
- Freezing winters, exterior wall: choose among the three frost-free listings (WHK 12 inch, WHK 4 inch, Lifarsculp 4 inch) by wall thickness. Pick the WHK 4 inch if you want a stated vacuum breaker.
- Garage or washing station that does not freeze: the Woodford 122PX.
- PEX plumbing, outlet thread confirmed: the Woodford V22PX-10-MH.
- Prier: only after you have checked the outlet and intended use with the manufacturer, given the conflicts in its listing.
Safety and compliance notes
None of these listings addresses which hoses are suitable for hot water, so check your hose label as well as the faucet manual. The lead-free statements on the WHK and Lifarsculp listings name no standard, and none of the listings states that the faucet is certified for drinking water. For installation, backflow rules and winter drain-down, follow the product manual and local code.
FAQ
Can a garden hose be used with hot water?
These listings do not say. Check the hose’s own label for a hot-water rating. The WHK 12 inch listing gives a working water temperature of 32 to 140 F and a maximum of 180 F for the faucet itself.
Do I need to disconnect the hose in winter?
The BW Valve guide says to disconnect the hose before the first frost and calls a connected hose the most common cause of failure.
What does GHT mean?
It stands for garden hose thread. The WHK listings describe the 3/4 inch male GHT outlet as the connection for a standard American female garden hose.
What does an anti-siphon valve do?
The BW Valve guide says it stops a hose left in a bucket from drawing dirty water back into the home’s supply during a pressure drop.
Are Woodford faucets frost-free?
The 122PX listing says it is for areas where freezing is not expected. The V22PX-10-MH listing calls it intended for year-round residential irrigation and its style field says freezeless, but its bullets do not describe a freeze design.
What if I only need a splitter on an existing tap?
Then a hose splitter may fit better than a new fixture. See our notes on a 4-way hose splitter and a hose connector with a shut-off valve.
Keep reading
- Garden hose attachment to a kitchen faucet (nearest topic on this site)
- Sink faucet to water hose adapter (nearest topic)
- Garden hose connector with a shut-off valve (nearest topic)
Bottom line
If the wall freezes, pick one of the three frost-free listings by wall thickness, and prefer the WHK 4 inch when you want a stated vacuum breaker or the WHK 12 inch when you want the most stated specs. If the location never freezes and you plumb with PEX, the Woodford models fit, as long as you confirm the outlet thread. Treat every listing conflict above as a question for the seller before you cut into a wall.
Sources
- BW Valve, Ultimate Guide to Frost-Proof Sillcocks: how the stem works, 5 to 10 degree downward slope, hose disconnection, anti-siphon, length selection (a supplier guide, not a code reference).
